.STL File / 3D model: 'LUCKY' CLOVER SPINNING KEY FOBS

'Lucky' Clover Key Fobs are a small fun print for people of Irish descent or who believe that 4 leaf clovers bring good fortune. And, if the luck of the Irish is with you they will spin!

There is a 3 and 4 leaf version. They're a quick and effortless print without raft or service... and in green of course.

There is a small bit of designed in support which should be removed (but isn't essential). Refer to he instructions and images for extra information.

Notice: If you like this check out the rest of designs and my fun.

Print Settings

Printer Brand: MakerBot

Printer: MakerBot Replicator 2

Rafts: No

Supports: No

Resolution: 0.20mm / Standard

Infill: 2 Shells / 75 percent infill


Notes:

Recommend not using Raft so the clover surface is smoother on the bottom. Take care when removing t build plate. No support required. Use infill to make sure it is strong and will last in your key ring.

Post-Printing

Eliminate the designed in service collar (Refer images)

There is a small designed in service collar on the end that attaches to the ring that is key. This can be left on however there is a ring around this area to make it cut / break so that it functions better around A vital ring. / break should cut away easily.

If your clover fob doesn't spin straight off the build plate a small amount of downward pressure on the clover should free it (Refer images)

3757 Views 1400 Downloads

Related designs

ldr