.STL File / 3D model: REPRAPPRO MENDEL COOLING FAN BRACKET II

An improved design over my previous cooling fan arrangement. The fan is attached by this version to the X carriage.

http://www.britishideas.com/2012/10/15/improved-reprappro-mendel-cooling-fan-bracket/

Instructions

Print one of each part.

Put bolt through the two components or a M3x18 to create a joint.

Use M3 bolts to attach a 40mm x 40mm x 10mm fan.

Attach to the top of the X carriage using the four existing accessory bolts.

Angle the fan so it is pointing down towards the hotend and tighten the bolt.

9025 Views 1702 Downloads

Related designs

ldr