.STL File / 3D model: BOOK RING

It is a thumb ring made to help hold a book open when reading one-given. It's not elaborate. I kept it simple and practical. The thumb hole is 33mm in diameter. The thumb ring isn't designed to fit snuggly round the thumb so the model is "one-size-fits-all". In case the ring hole proves too little, you can scale up the whole model without loss of functionality. The depicted version was printed in moderate quality style with a 30% fill in ABS. I 'd envision PLA and other printing parameters would have no actual effect on the fundamental operation of the ring. The ring can be worn one of two manners; with the ring side toward the publication, or away from the novel (as pictured). Your option as well as both operate nicely ought to be an issue of relaxation. I've contained obj and stl files. I should say that the layout is inspired by a recent Instructable (http://www.instructables.com/id/How-make-a-reader-ring-with-Sugru/). Love your reading.


designed in TinkerCad
slit in Cura
printed in ABS
layer height 0.2mm
wall thickness 0.8mm
fill density 30%
temperature 260
print speed 50mm/s

11595 Views 3082 Downloads


Related designs