.STL File / 3D model: STINGRAY - HK 150 ESC COVER

A cover to the HobbyKing 150 ESC which may be used in skateboards and longboards. Provides some impact protection in addition to some water/elements protection. Requires HK150 to be disassembled to get the job done. This voids your warranty do at your own risk. Skateboards weren't meant to be motorized ride at your own risk. Always wear a helmet. . Please do your best to not die doing this...

Instructions

Disassemble your HK150 removing protective cover and buff... unplug fan. . This voids warranties try at your own risk. With silicone any connections which are revealed cover. Try translucent as the brown one I used (didnt realize it was brownish) looks ugly...
Print in ABS 2mm height, 4 shells, 110 heated construct plate, rafts off, supports on. Could be printed upside down or right side up... enjoyed it better right side up.
The space will comfortably hold the receiver of your remote making it super stealthy. Loop the on/off switch and put it in. . The enclosure will hold it in position. Then screw the enclosure on your board using 1/2" long wood screws (regular wood screws with everything but the last inch work nicely. Screw either side and be carefull not to pinch the wires in the screw hole.
Probably not a good idea to drive in a flood or swimmingpool But have had no problems with puddles.
Visit endless sphere to learn how to make your longboard's rest in addition to some cool friends. Tell them Beto Sent you.
matte black spraypaint looks cool... printing in black is cooler even...


Related designs

ldr