Ethernet Cable Runners offer an easy solution to keep your Ethernet cables tidy, under control and easy to access, insert and remove.
The range accommodates from 2 to 16 cables. 2 cables are just accepted up to by each slot. This ensures you can easily access and eliminate inner cables...the maximum that could be outside it is one.
There are also three types. The type is for use unsecured along the floor or across a desk. The two types have two types to secure the Ethernet Cable Runners zip tie. Type "T" has the slot aligned inline using the cables direction. Type "T90" has the slot rotated 90 degrees from the cable management. The slot is suitable for use with medium size cable ties. This allow bunches on cables to be run together under shelves / racking. Refer to the images to find out more.
I have also provided a screw mounting version of this range at http://www.thingiverse.com/thing:1471789. This should make it more easy for people to find the type.
They are small blocks that print so are a simple and economical solution to a regular issue in offices and at home. Print lots plus a range so that you've always got the right one to match your need at the time... Tidy up your cables today!
And, if the cables you're using change from size Ethernet cables that are commonuniformly scale them.
Please refer to the images and publish instructions.
Note: If you like these check out the rest of my practical and fun designs.
Printer Brand: MakerBot
Printer: MakerBot Replicator (5th Generation)
Resolution: Standard / 0.20mm
Infill: 3 Shells / 50% infill / PLA recommended
To make sure print them strong by using 3 shells and infill that is 50%. They work great. They should print nicely in ABS.
Just uniformly scale them if you discover the cables you're using vary from common size Ethernet cables.
Just get rid of the Raft and push in your cables...
Tell us more...