.STL File / 3D model: EARPLUG CABLE TIDY- PROTECTS EARPLUGS AND SECURES THE CABLE

The Earplug Cable Tidy lets you securely wind the cable up and shields device Earplugs. It is easy and quick to keep your Earplugs safe as soon as you've used it a couple of times and the cable wound away tidily.

Quick and easy to use:

  1. Twist the end plug through one of the holes at the Earplug Cable Tidy (You Will Have to work out which hole best matches the length of your Earplug Cable to keep the cable securely),

  2. Pull the cable all the way through until the Earplugs are securely positioned (protected) within the centre area of the Earplug Tidy

  3. Firmly wind the cable around the outside of the Earplug Cable Tidy

4. Push the end plug through the hole at the Earplug Tidy that provide just enough length to push it across the surface of the Earplugs (securing them so that they can not come out) and fully into the end plug securing hole.

Note sets of Earplugs have different length cables. Determine which hole matches your cable to keep the Earplugs securely and fully insert the end plug in the hole that is securing. You will need to push the wound down a fraction to push at the end plug back into the central area up cable.

If you like this check out more of my listings!

Instructions

On a Replicator two and Generation Replicator the Earplug Cable Tidy prints at Std. /0.20mm resolution with 3 shells and 35% infill. Use Raft but no support required.

17096 Views 5311 Downloads

Related designs

ldr