.STL File / 3D model: TWISTED 6-SIDED VASE BASIC

This pleasant, simple to print vase is going to be a good present for family or friend to come along with some fine blooms!

Directions

1) Download file
2) Create gcode
The 3D STL is a closed file. I utilized Skeinforge to slit my prints (third one printing now). The 3D model might not fit your 3D printer and is silent tall @200mm. Rescale or chop the top part to fit your printer.
Here's what I did creating gcode:

  • 3 underside layers
  • No fill (clearly)
  • 1 additional casing (making 2 casings on wall)
  • Layer height 0,3 (to conserve print time)
  • Remove the top 3 layers by hand (after gcode was created)
    3) Pick a colour.
    I personally enjoy the semitransparent stuff for all these items.
    4) Print the vase. , it takes 2:30 up to 3:00 hours on my regular Ultimaker with SF settings as described previously. The end result is a rather powerful and good looking vase
    5) Enjoy!
225091 Views 85486 Downloads

Related designs

ldr