.STL File / 3D model: EIFFEL TOWER (SCALED 3X) PRINTED ON ULTIMAKER

It is a scaled up version of http://www.thingiverse.com/thing:22051. To be able to print on the ultimaker I had to divide this in two stl files. Some people requested I upload the 2 stls for them to test out. So here it's...

  • Hitesh

Original file by Pranav Panchal, downloaded from GrabCAD: grabcad.com/library/eiffel-tower

Directions

6/8 Edit: I 've uploaded the non schism variant as well - EiffelTowerTALL.stl - for folks that need to download the uncut version to play around with..

  1. Download STL files (eiffel1.stl, eiffel2.stl)
  2. Slit
  3. Print (Its rather a challenging print - took about 20 hours)
  4. Paste Eiffel2.stl on top of Eiffel1.stl.

I slit using Cura (https://github.com/daid/Cura/wiki). One thing to notice is that the slicer didn't find the perpendicular portions of the railings (as revealed in the picture with black arrow) , so the flat component was sort of hanging in atmosphere (As seen in the picture of print on auto).. but it was only 4-5 layers, so I didn't care.. Only removed those sequences after.. I consider should you play around with Cura settings or alternative slicer settings like nozzle size, you can even get the perpendicular railings to print..

87912 Views 26003 Downloads

Related designs

ldr