.STL File / 3D model: BOX MOD BOTTOM FEEDER MECHANICAL WITH PUSH BUTTON LOCK (V3)

This is another evolution of this one: http://www.thingiverse.com/thing:1758376.

Here u can read a detailed photo-tutorial: http://www.esigblog.com/box-mod-bottom-feeder-mini-meccanica-foto-tutorial/

How required from some of you people do not want use keyston or other kind of contact but want use only strips (copper, brass or silver o whatever u want).

This is: 77x42x24 mm.

Suggested layer:

  • 0.10 mm (100 micron) for push button A & B;
  • 0.15 mm (150 micron) for body and front panel.

There are the follow kind of body and front panel:

  • drip cap hole 10 and 12 mm;
  • large hole for fatdaddy 22x1 mm drip cap.

In render the red body is the fatdaddy version, the other is the normal one.

About the strips these should work fine: http://fave.co/2crgoGr or http://fave.co/2cri1DS

To complete u need:

  • a drip cap (i love MAVV4 from svapamo but u can use whatever u want);
  • 12x magnets 3x1 > http://fave.co/2czxo0r
  • 6 or 8.5 rount (18 mm) bottle with tube.

Update 09/09/2016

  • added battle_spacer.stp (optional): u can print to have the bottle near to the squonk hole of the front panel.

Update 12/09/2016

  • added fatdaddy_positive_pin_blocker.stl: u need this if u want use the Fat Daddy bottom feeder cap v5.

Here u can read a detailed photo-tutorial: http://www.esigblog.com/box-mod-bottom-feeder-mini-meccanica-foto-tutorial/

RELEASED.

https://www.youtube.com/watch?v=FS2czySNl5Q

14493 Views 3151 Downloads

Related designs

ldr