.STL File / 3D model: GALAXY S3 CAR MOUNT W/ NFC TAG

I designed this mount for my Samsung Galaxy S3 without a case. It mounts into my CD slot that is .125" tall.

The center blind hole and cap are for a NFC tag. I used NFC Task Launcher and their 1" dia. tag.

Instructions

Print:
(1) GS3-Plate.stl
or
(1) GS3-1.stl
(1) GS3-2.stl
(1) GS3-3.stl
(1) GS3-4.stl

Hardware:
(4) #4 x 3/8" flat head screws
(4) #4 hex nuts

  1. Print GS3-Plate.stl or the individual parts. Use at least 2 extra shells.
  2. Resize through holes to .129"
  3. Touch up 82deg. countersinks if needed to ensure the screws are below flush.
  4. Cut off standoffs under the tabs that insert into the CD slot.
  5. Assemble using #4 flat head screws and nuts.
  6. Stick the NFC tag inside the cap and install it into the mount.
25930 Views 5081 Downloads

Related designs

ldr