.STL File / 3D model: TEVO TARANTULA DIRECT E3D TITAN X-CARRIAGE

This is Direct Feed Titan Extruder X-Carriage Made to work the the Tevo Tarantula.

This was designed to work especially with an E3Dv6 Hotend, E3D Titan Extruder, and a Nema 17 Pancake Stepper motor (Link below to specs and dimensions)

Features:

  • Extruder Direct Feed setup lowered to clear the 2040 Tarantula X Rail
  • Currently support standard E3D Heatblock BLTouch, SN04 (Stock) and Round Proximity Sensors
  • 3 Wheeled design to allow the stepper motor drop to the correct height and enables easier tensioning of wheels against X ray
  • Reinforcement beams with integrated cable tie slots (belt lock variant)
  • 2 Versions:

    X Belt locking mechanism (by thingirob) - remove the use of zip ties to secure X belt
    X Belt Fine Adjustment Version (modeled from Ulmenkott) - provides fine adjustment of X belt pressure

IMPORTANT: You'll need to make a few changes in hardware and your firmware since the endstop was relocated. These changes were done using Marlin 1.1 RC7 & MKS Base 1.2:

  1. Uncomment specify USE_XMAX_PLUG
  2. Changed X_HOME_DIR from -1 to 1
  3. Moved the connector on the MKS plank from -X to +X

X & Y Probe Offset(s):

BLTouch:
X Probe offset from nozzle: 20mm
Y Probe offset from nozzle: 65mm

SN04:
X Probe offset from nozzle: 20mm
Y Probe offset from nozzle: 75mm

Round:
X Probe offset from nozzle: 20mm
Y Probe offset from nozzle: 90mm

NOTE: I have included the native 123D Layout formats so you can modify if desired. Keeping this open source to hopefully promote improvements and new designs.

In development:

  • 8.5mm spacer for Volcano Heatblock
  • Integrated Layer Fan mount & Fan to eliminate the need for the E3D Hotend Fan to be used as a mounting point

Special Thanks: This is a remix of thingirob's Tevo Tarantula Modular X Automobile Basic, e3d 2x
(http://www.thingiverse.com/thing:1438795) in addition to using Ulmenkott belt tensioner thought (http://www.thingiverse.com/thing:1640682). Without their designs it would of been hard to create this remix.

Relavant Links:
E3Dv6 Hotend - http://e3d-online.com/E3D-v6
E3D Titan Extuder - http://e3d-online.com/Titan-Extruder
Nema 17 Pancake Motor - http://www.omc-stepperonline.com/nema-17-bipolar-step-motor-35v-1a-13ncm184ozin-17hs081004s-p-101.html

Print Settings

Printer:

Tevo Tarantula

Resolution:

0.2

Infill:

85


Notes:

Printed with PETG.

11405 Views 1199 Downloads

Related designs

ldr