To learn more please watch this video: https://youtu.be/tT5e7fUJAcs

It's time for another 3D model for you guys! This time I chose to make Rowlet. I also plan on making another two starters soon so ensure you get subscribed!

I created this model in Fusion 360 using their sculpting/forms tools. I created the main body by means of a box form. Until I had the shape I wanted I just pulled out different spots. I then created a sketch throughout the body for the eyes and details. I cut on the form to be able to keep the curvature and extruded those. The feet were created from sketches.

Print Settings: (Robo 3D R1)
Layer Height: 0.1mm
Infill: 20 percent
Supports: Yes
Raft: Yes
Printing Time: ~7 hours

Post Processing:
Step 1: Sand/File any spots.
Step 2: Apply plastic primer. Give it a couple of coats, letting it dry in between.
Step 3: Apply a marginally paint to his eyes and body. A sponge was used by us for coverage.
Step 4: Apply a tan colour to the feathers utilizing the same technique.
Step 5: Then we used a paintbrush to apply colour to the details like the green feather/tail, and his feet and eyes.
Step 6: Let dry and enjoy!

3572 Views 1043 Downloads

Related designs