• Item Elements
  • This instance was designed by me for the IPhone 5s/5c using Solidworks. 

    I determined to attempt an elaborate design for this instance to add some fine elements, the complete effect was not bad. Yet this layout is worth downloading for the aesthetics as an alternative to protection. 

    The border of the case it powerful will protect your phone from scrapes and knocks if dropped but the great design on the rear make it less capable to shield the rear of the mobile case.

    The case cuts easily onto the telephone cutting on snugly enough to stay on

    I designed it to be a quick and simple print - set level down onto the print bed (so the file will print as it's - without the need for support materials or any additional measures).

    I printed this one using an Ultimaker 2 but it'll function just as well using other printers. 

    I used white PLA - at a layer height of 0.2mm and print speed 50mm/s with great results, as it's a quick print you could reduce the layer height farther or select slower print settings to create an instance of even higher quality!


    If you buy this item through the MyMiniFactory Store please note:

    • This merchandise will come unpainted and unassembled when you purchase it. We support you to be creative, personalize it as you want. Express your awesomeness and share an image of the final result with us!

    • The colour of your print will be selected at random and will be printed in either ABS or PLA filament unless you've a special request.

    • Delivery time will be between 1 and 4 weeks from the minute the item is ordered by you. This is dependent on the amount of time the item chooses to print and where you are.

    • E-Mail [email protected] if you'd like any additional advice or if you've any specific requests.

    • Occasionally orders will be printed live on MyMiniFactory TV - check it out here.


  • Opinions
  • Printing Details
  • Import the file into your printer applications with the back.

    Turn off support stuff and you are ready to print.

    The finish on the rear of the case will be more gleaming if it's printed onto a smooth surface like glass, printing onto other stuff including masking tape will lead to more of a matte finish.

Related designs