.STL File / 3D model: BOX MOD BOTTOM FEEDER & CLOUD CHASING (MOSFTET & DUAL 18650)

This box mod is a bottom feeder (squonking) box mod that work with two 18650 and a mosfet.
U can choose to mound the battery in series or in parallel.

To mount u need:

  • 8 magnets 4x1 mm;
  • a mosfet (I used the IRLB3034);
  • a 12 mm push button for the flame (I used a mitec);
  • a drip cap (I used a svapiamo.com simple flat);
  • a 6/8 ml bottle;
  • touch and wire.

U can choose for panel and body with different aesthetic.

U can choose for the body with:

  • Left or right push button hole;
  • drip cap simple flat svapiamo.com / hole 10 mm / hole 12 mm.

My box was printed with a Zortrax M200 ad 140 micron and Z-ABS.

Good luck !

Here u can find some other informations and shots (in italian, use google translator !) :
http://www.esigblog.com/finalmente-bottom-feeder-e-tanti-watti/

10100 Views 1656 Downloads

Related designs

ldr