.STL File / 3D model: PHANTOM 3 PAYLOAD BRIDGE

The concept of the project was to generate a payload bridge for the DJI Phantom 3 which can carry any device, such as lights, cameras or 360 cameras (what I built it for).

THIS DESIGN WAS DONE WITHOUT A PHANTOM 3. I SO I WAIT TO GET CONFIRMATION THAT IT FITS.

For cameras - to avoid the effect - there is a damper necessary between the bridge and the camera mount. Additionally, I recommend to ensure the camera mount through the central hole with the bride with 2 cable binders.

Apart from the printed part you will need to buy the 1/4" screws and the dampers.
You can find them here:
Screws: https://www.amazon.de/MENGS-Schraube-Edelstahl-Einbeinstativ-Schnellwechselplatte/dp/B00IXDECV4/ref=pd_sim_421_5?_encoding=UTF8&psc=1&refRID=1GJV2T2Q8TTXAMB66AWT

Dampers: https://www.dronematters.com/rubber-damper-s-black-526.html
or http://www.rakuten.de/produkt/pmt-10x-mini-daempfer-gummi-kamera-anti-vibration-shock-absorber-f-250er-fpv-1315469041.html?cid=google_base&utm_source=gshopping&utm_medium=referral&utm_campaign=googlebase-2010-07&portaldv=6&sclid=a_google_de_pla_empty_premium_modellbau_181-635-6740_1315469041_c&gclid=Cj0KEQiAnb3DBRCX2ZnSnMyO9dIBEiQAOcXYHz02ZhB2WWQkVCvIspDQjfAiPHw83g2C-sD6vUOjZMsaAlnb8P8HAQ

The hole dimensions should be 7 mm.

As my first mounting plate was not long enough (too much drone in the video, see attached video) I extended the drone mount in the attached STL file.

I published all parts in PET (white) or t-glase (silver grey) at 100 %.

My first test video of the setup with the Phantom 4 bridge can be found in Youtube:
https://youtu.be/YqrhieAhr_4.

If you like it - tip me.

Attention: Flying with payload changes your Phantom 4's behaviour. When flying with payload avoid conditions. Avoid rapid movements. Strategy for longer descent times. Always fly.

Overloading your Phantom can lead to overheating quick battery drain and the motors.

Applying these designs the pilot carries the risk for all prospective damages. The designer can not be held accountable for any damage.


Related designs

ldr