.STL File / 3D model: DOWNLOAD THE FILAMENT HANGER (SPOOL HOLDER AND STORAGE SOLUTION) BY JOSHUA DENNIS

  • Item Details
  • Filament spool mount and hanging storage option

    Got simple of storage and to be mounted on a wall or stand behind a printer for direct feeding.

     

     

    3 items - primary hanger and two accessories: a locking end cap and a dowel mount. 

    dowel mount:

    • You can use any size of dowel but this unique hanger can fit as much as a 32mm/1.25in dowel
    • fits spools sizes up to 110mm/4.25in radius by 70mm/2.5in wide with holes larger than 44.5mm/1.75in

    printing time (with my print settings):

    1. the hanger: about 9-12hrs 16.8meters
    2. the end cap: about 1.5hrs 1.97meters,
    3. the dowel mounts: about 2hrs 3.9meters each. 

    Zip or download individual files file for all 3 items.

  • Opinions
  • Printing Details
  • I only did these a fast practical prints as they could be so mine aren't as fairly. My settings; using an ultimaker 2 with 3mm abs .2 layer height 1.6mm walls/top/bottom (this is where most of the power of the section comes from.) 20% grid infill density (you might have the ability to get away with less, but its a great fill to prevent pillowing) Support isn't required for dowel and the hanger mount. I'd urge support for the end cap for 90 degree overhangs it is only going to wind up in the station that is locking. I used 15 lines of brim but that is only me.

Related designs

ldr