.STL File / 3D model: DOWNLOAD 3D FILLEMENT BRAKE SYSTEM BY NICK GEURTS VAN KESSEL

  • Item Details
  • This brake system wil work with every printer but watch out with the fillement I use leapfrog it commes on black spools that fit precisely onto the holder 
    you can use it without the adapter and brakering 
    in the future I am going to come out with differet adapters and bands for distinct rolls ( or simply inquire ) 

    you must tap a m6 hole into the entire holder and a bolt with a rivet holds it in place ( tighten the bolt for more braking)
    I print with this system for 1 year now with no malfunction ( about 80 rolls so far)

     

    use 50% infill or higher for great powerful results 
    good luck printing without any fillement malfunctions 

    chef

  • Opinions
  • Printing Details
  • Print at 0.2 mm layer height, with 10% infill. This takes 12 hours and 47 minutes and uses 122 grams of filament.

Tags


Related designs

ldr