.STL File / 3D model: ULTIPLOTTER, PLOTTER HEAD FOR THE ULTIMAKER2 BY ULTIARJAN – YOUMAGINE 🔧

WARNING !

IN THE EVENT THAT YOU USE THIS HEAD TOGETHER WITH THE DEFAULT UM2 FIRMWARE IT'LL CRASH INTO THE FRONT OF THE PRINTER AT PRINTSTART !!

CONSTANTLY AMOUNT YOUR BED AFTER A HEADCHANGE.

This Plotter fits the Ultimaker2 modular printhead.https://www.youmagine.com/designs/modular-printhead-for-ultimaker2-v2-2

Unlike in a standard ballpoint, in this matter you must put the springtime in the REAR of the pencil.

I changed my firmware to keep away from the borders of the printer a couple cm during print bed and beginning leveling. This really is really where I learned how; http://umforum.ultimaker.com/index.php?/topic/6436-more-information-during-print/?p=96906

use CURA to load a picture, complete hight around 0.8, layers 0.1

Other settings after photo consequence;

Z hop 3mm

Cut off thing underside, play with this depending on the image, look at layer view.

Nozzle size, this determines the space between lines that are infill. From the 2 images contained here one is at 0.4 nozzle, the other at 2.5mm

When beginning the print, simply dial the printing will begin and nozzle temp to 0 and bed temp.

This informative article offers the use on a CURA setting file, but I didn't use it; https://ultimaker.com/en/stories/view/99-transform-your-ultimaker-in-a-desktop-pen-plotter


Related designs

ldr