.STL File / 3D model: DOWNLOAD TTB-MRLP - MODEL ROCKET LAUNCH PAD BY TTB STUDIOS

  • Item Details
  • A 3D model rocket launch pad that was printed constructed to last! With an adjustable leg for leveling or training your rocket into the wind. Designed to be used with standard 1/8" or 3/16" (Maxi) sized stick for pleasure with ALL sized rockets. The Chief leg wants just 1x of the other pieces for an entire launch pad and printed 2x.

    Really small hardware will be needed to complete this launch pad.*

    BOM-
    A)1x- 1/8" x 24" pole
    B)1x- 3/16" x 48" pole (optional)
    C)1x- 1/4" Keyless Chuck
    D)2x- 1/4-20 x 1" bolt (hex or allen cap)
    E)1x- 1/4" ID nylon washer
    F)1x- 1/4-20 nylon insert lock-nut
    G)1x- 3mm x 0.5mm x 20mm bolt (hex or allen cap)
    H)1x- 1/2" OD toothed lock washer (min. 3mm ID)
    I)1x- 1/2" OD fender washer (min. 3mm ID)
    J)1x- 3mm x 0.5mm wingnut
    K)1x- big tin can lid (coffee cans size ideal)
    L)3x- 1/4-20 x 3 1/2" bolt (hex or allen cap) (optional)**
    M)3x- 1/4-20 nylon insert lock-nut (optional)**
    N)3x- 1/4" ID split-lock washer (optional)**
    O)3x- 1/4" ID flat washer (elective)**

    ** Note- Discretionary hardware for bolting launch pad otherwise the launch pad may be pasted for long-term setup and snaps.

  • Opinions
  • Printing Details

Related designs

ldr