I remixed the very cute Buddha Frog model from Blue_Alien at http://www.thingiverse.com/thing:84225 and set it on a 30mm circular beveled base.
Remixed using a 30mm foundation with Meshmixer (file attached).
Printed from Cura at 205 degrees in PLA on a Printrbot Simple Metal at 0.2mm layer height, 0.8 shell thickness and bottom/top thickness, 15% fill. Support anyplace grid structure. I set the overhang angle at 65 degrees, fill amount 25%, x/ydistance 0.5mm and z distance 0.14mm.