Ultimate camera slider for timelapse and video,
2 axis movement, very stable, cheap, higher movement accuracy, turnable to vertical position.
What you need:
2x Motors nema 17, controlled by Miniengine 2.0 (Airic lenz Photography project)
IMPORTANT: Nema 17 measurements, the 40mm height version is necessary!
2x GT2 motor pulley
1x GT2 5mm belt (clearly the length depends upon the length that you want the slider)
10x 626 ZZ (6x6x19 mm) bearing
1X 6200 (30x9x10 mm) bearing
4x aluminium 18 millimeter tubes (length of the slider).
M6 bolts, nuts and washers (I will upload the lenght detail list soon).
1x 3/8" bolt and nut
Rafts: Doesn't Matter
0.4 layer height and 50% fill makes it strong enough.