.STL File / 3D model: 🔬DUCATI 1199 SUPERBIKE (COMPLEX)

Ducati 1199 Superbike (COMPLEX)

Intermediate-progress modellers urged... for now.

*Version refinements and comprehensive directions coming shortly for beginner/intermediate modellers.
*

This really is a 40+ component construct designed especially for FDM printers like the Ultimaker. This example was printed on a ultimaker first at changing resolutions from 0.1mm / layer to 0.15mm / layer. Painted in acrylics, Enamels and lacquers.

- Filing and some fitting may be deemed necessary.
-Superglue is needed for a tight fit, but everything has a peg/slot to help in construction and alignment.
-front Steering System works, back wheels don't turn if chain is present. (for obvious reasons)
-Needs back stand to be free standing.

You may want
standard file establish
Super glue
exacto knife

Begin with all the Body + engine block and build outwards.
print body at lower layer height one at a time for smoother outer finish.

More information on the motorcycle on the Ultimaker blog: https://www.ultimaker.com/blogs/news/2014/09/03/3d-printed-ducati-1199-superbike 

?Look for an approaching guide to printing & construction!






Related designs

ldr