.STL File / 3D model: DOWNLOAD THE LITTLE PRINCE - 'DRAWING NUMBER TWO' BY EVAVOOO

  • Item Details
  • A support-free printable model of a snake have an elephant; inspired by the watercolour illustations from the French publication Le Petit Prince (1943).

    'My drawing wasn't a graphic of a hat. It was a picture of a boa constrictor digesting an elephant. But since the grown ups were unable to comprehend it, I made another drawing: I drew on the inside of the boa constrictor, so that the grown ups could see it. They constantly have to have things clarified. My Drawing Number Two looking like this.....' - The Little Prince, by Antoine De Saint-Exupery.

    Take a look at more in the set.

    The first theory behind transforming the illustations from 2D to 3D would be to create the experience of literature to enhance for the blind and partially sighted through rendition images and illustrations from well known fiction into alleviations and tactile things. Stay tuned :)

    _________________________________________________________________________

    If you buy this item through the MyMiniFactory Store please note:

    • This merchandise will come unpainted and unassembled when you purchase it. We support you to be creative, personalize it as you want. Express your awesomeness and share an image of the final result with us!

    • The colour of your print will be selected at random and will be printed in either ABS or PLA filament unless you've a special request.

    • Delivery time will be between 1 and 4 weeks from the minute the item is ordered by you. This is dependent on the amount of time the item chooses to print and where you are.

    • E-Mail [email protected] if you'd like any additional advice or if you've any special requests.

    • Occasionally orders will be printed live on MyMiniFactory TV - check it out here.

    _________________________________________________________________________

  • Opinions
  • Printing Details
  • Urged print settings (as pictured) 0.20mm layer height 20% infill. No support. Printed from snakes head at full scale 18cm span to tip of tail, 33g of 2 hour and filament 50 minutes print time. (Reduce infill for faster print time).

Related designs

ldr